Generated by EAGLE CAM Processor 5.7.0

Drill Station Info File: C:/Projects/Archives/Coincidence Counter/Sch/Coincidence Counter.dri

 Date              : 05/03/2010 9:22:08
 Drills            : C:/Projects/Archives/Coincidence Counter/Sch/Drills for APC Prototype service.drl
 Device            : Excellon drill station

Parameter settings:

 Tolerance Drill + :  4.00 %
 Tolerance Drill - :  4.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch
 Layers            : Drills Holes

Drill File Info:

 Data Mode         : Absolute
 Units             : 1/10000 Inch

Drills used:

 Code  Size       used

 T01   0.0200inch    61
 T02   0.0280inch   129
 T03   0.0350inch    20
 T05   0.0420inch    58
 T06   0.0520inch     6
 T08   0.0860inch    24
 T09   0.1250inch    11

Total number of drills: 309

Plotfiles:

 C:/Projects/Archives/Coincidence Counter/Sch/Coincidence Counter.NcDrill