X-Deep32 Installation Instructions

1) Download X-Deep/32

2) Install xdp40Full.exe.
   

3) Launch X-Server
   

4) Uncheck "Always show this Dialog Box"
    Select IP:[ 127.0.0.1] Netmask: [255.0.0.0] Status [Up]
    Click Select.
   

5) Uncheck always check for XDM enabled hosts on startup.
   

6) Click the icon in the top left corner of the application window that opens.
   Go to X-Server Menu -> X-Server Options
   

7) Click the Window Modes Tab.
   Uncheck "Supress X-Deep/32 splash window on startup"
   Click "Multiple MS Window Mode"
   Uncheck "Display Root Window"
   

8) When prompted, Restart the X-server.
   

9) Launch PuTTY.
   

10) Load the server settings (eg. apollo.physics.utoronto.ca) configuration
    

11) Go to Connection->SSH->Tunnels 
    Check "Enable X11 Forwarding"
    

12) Click Session. Click Save.
    Open a connection to the server (eg. apollo).

13) From the command prompt, type xterm &