TCP Commands
============================
Initial 31 August, 2006.
Revised 25 Nov 2008 A.S. (removed deleted commands).



NOTE: Refer to "All About MicroMatic & PhaseOMatic.doc" in PhaseOMatic\Docs in the Archives for details.



Hex  Bytes Description
TYPE 1 COMMANDS
0x7F   1   Keep TCP connection alive
0xA0   2   Power on or off the DDS Core
0xA1   1   Hardware Reset of the DDS, stops scan, set profile to 0
0xA2   1   Latch contents of DDS frequency buffer to memory
0xA3   2   Selects active DDS profile, 0 to 3
0xA4   1   Wait for Adwin trigger
0xA5   6   Set the FTW (Freq Tuning Word) in selected profile
0xA6   4   Power PFD Core, CPs and set Fast Lock options
0xAA   12  Initiate DDS scanning from current frequency at rate and step size
0xAB   3   End a DDS ramp
0xAC   7   Initiate DDS ramping when followed by a FUD
0xAD   3   Set the DAC output to desired value
0xAE   9   Intiate DAC scanning between two voltages
0xAF   2   Sets states of lin/int and feedback CMOS Switches

TYPE 2,3 COMMANDS
0xC0   1   Clear current event list from command sequence
0xC1   1   Following command is to be added to command sequence
0xC2   2   Save the current command sequence to flash
0xC3   2   Execute a saved command sequence
0xC4   2   Execute the command sequence currently in RAM