PhaseOMatic Version Log
================================
Alan Stummer


Rabbit - Dynamic C
------------------
Ver 1.0.6   13 June 2008   A.S.
 - bug fix: was glitching freq at start of ramps, bypassed DdsFreqAccumClr() but only partially tested.

Ver 1.0.5   23 April 2008   A.S.
 - appears to be good, tested setting frequencies and ramping with panel and test GUI.
 - added debug sending ADWin trigger count to Warren.


GUI - for PhaseOMatic and MicroMatic
------------------------------------
Rev 2.1.12   18 June 2008   A.S.
 - major overhaul of command sequences sent to Rabbit.
 - ramping now uses existing freq as start and has seperate ramp stop freq.
Rev 2.1.11   22 April 2008   A.S.
 - debugged ADWin trigger for single and ramped frequencies.
Rev 2.0.10   22 April 2008   A.S.
 - added "Wait for ADWin trigger" checkbox.
Rev 2.0.9   16 April 2008   A.S.
 - minor: when setting frequency for AD9858 only, now sets CMOS switches and resets DDS first.
Rev 2.0.9   8 April 2008   A.S.
 - under testing: added fixed slow ramp from 5 to 10MHz.
Rev 2.0.8   4 April 2008   A.S.
 - minor: FTW1 2 LS bytes now 0x00, were 0x01 and 0x02.
Rev 2.0.7   24 March 2008   A.S.
 - added system clock frequency box, to accomodate both AD9854 and AD9858.
Rev 2.0.6   12 March 2008   A.S.
 - changed port to 37829
Rev 2.0.5  22 Jan 2008   A.s.
 - changed to default 192.168.1.152 on port 100
Rev 2.0.4  5 Sept 2007   A.S.
 - removed actual freq display scaler so shows true freq.
 - allowed two instances, although 2nd won't work because 1st is using the port.
Rev 2.0.3  5 April 2005  A.S.
 - changed frequency label to show 8x DDS frequency, for 1.3GHz assembly which multiplies the DDS by 8.
Rev 2.0.2  15 March 2007   A.S.
 - added display of actual frequency.
 - changed tab order so that frequency is first.
Rev 2.0.1  6 March 2007   A.S.
 - removed port box, fixed as a constant at 1111.
Rev 2.0.0  28 Feb 2007   A.S.
 - Major change: copied from Chroma-Matic project and strripped it down for use here.
Rev 1.0.4   15 Dec 2006   A.S.
 - added option to blip to low freq before setting requested freq, to force laser to scan out from zero.
Rev 1.0.3   14 Dec 2006   A.S.
 - fixed issues that LeCroy WS454 has with "app.previnstance" method crashing the program (at boot, empty combo boxes could not give a value of zero).
 - added revision label.
Rev 1.0.2   12 Dec 2006  A.S.
 - fixed calculation of Frequency Tuning Word (FTW) for DDS, had rounding error.
 - removed sending Rosa prescaler setting when connection is made to device.
 - added calculation of laser frequency offset.
Rev 1.0.1   Nov 2006   A.S.
 - initial release