SOFTWARE AND FIRMWARE VERSION LIST
===================================
Initial:  Alan Stummer 2011 Sept


FPGA VERILOG
----------------
ver 0.7   2014 May 6   A.S.
 - removed debug data packets
 - removed Rabbit cmd=0 to set I/O_UPDATE directly.
 - added rabbir commands 0x5 and 0x6 to allow and inhibit direct piping of Trigger input to IOupdate output.

ver 0.6   2012 March 9   A.S.
 - allowed cmd 0xC4 (restart cmd seq) to be in cmd seq, to allow looping

ver 0.5:  2011 Sept 1   A.S.
 - fully functional first release.
 - added command 0xA8, Wait For Ramp To End.


RABBIT DYNAMIC C 
----------------
ver 1.0.2   2014 April 25  A.S.
 - added frequency step option, either smooth (phase continious) or known phase.
 - removed Monitor (Warren) debugging packets
 - changed IP mask to 255.255.254.0 (was 255.255.255.0)
 - added rabbir commands 0x5 and 0x6 to allow and inhibit direct piping of Trigger input to IOupdate output.

ver 1.0.1   2012 Oct 12   A.S.
 - user complains that unit's RF shuts off after a period of inactivity, from 5 to 60 minutes or so.
 - added debugging to send to the monitor (Warren) notification of every command sent.

ver 1.0.0  2012 Mar 9   A.S.
 - allowed cmd 0xC4 (restart cmd seq) to be in cmd seq, to allow looping

ver 0.0.5 (debug):  2011 sept 1   A.S.
 - added reading of debug byte from FPGA to show on unit's display.
 - added command 0xA8, Wait For Ramp To End.
 - appears fully functional.


GUI VB6
----------------
ver 1.0.9  2016 April 20  A.S.
- added update of remote IP address in socket when changing IP address
- changed scope of registry to user (was loacl machine but win 8 doesn't allow that)

ver 0.0.8   2014 April 25  A.S.
 - corrected and clarified tool tip text on command sequence section
 - reordered command sequence buttons, added seperator between immediate and saved commands
 - added frequency step option, either smooth (phase continious) or known phase.
 - added option for Trigger to directly trip I/O_UPDATE on DDS (for phase setting)
 - added phase control but it doesn't work, still have to work on the Rabbit code...

ver 0.0.7   2012 March 9   A.S.
 - allowed cmd 0xC4 (restart cmd seq) to be in cmd seq, to allow looping

ver 0.0.6  unknown

ver 0.0.5:   7Sept 2011   A.S.
 - added command 0xA8, Wait For Ramp To End.

ver 0.0.4:   1 Sept 2011   A.S.
 - added reading of debug byte from FPGA to show on unit's display.
 - appears fully functional.