Changes from V1.0 Board: - Fixed pins 5+6 on the AD8676 - Added Molex connectors for optional panel mounted POTS for current/PZT gain - Add Molex connector to short PZT prop gain - Changed Trim POTS to Gull-wing leads - Removed cJS-1200 Switch and replaced with header Panel - Added PZT/Current Pots (Bourns 3310 Series) - Added Anti-rotation hole for error offset POT so that we can use the H22 knob Assembly Notes - Use special 25ppm/C resistors for R1,R2,R38,R39 and R40 - C46 is 100pF - Use 1.2k through hole resistors for +-15V, ramp and current on lights Box Construction - #8 drill for LED holes works perfectly - 3/8" for BNC's - 1/2" for board mounted BNCs - 1/4" for switches - 0.275" for reset switch